Professional AV & RF Rental — Las Vegas

Turnkey RF,
Audio over IP & Distributed
Audio Systems

Broadcast-grade gear for touring, broadcast, and live events. Wisycom, Digital Audio Denmark, Focusrite, Netgear AV, and proprietary systems built in-house.

Request a Quote Browse Inventory
Professional audio monitoring gear
Stocked Brands
Wisycom Shure Digital Audio Denmark Focusrite Netgear AV Avid Yamaha Professional Wireless R.A.D. Aaronia Sonnet
What We Offer
01

RF over Fiber

Extend wireless microphone antenna coverage across distances where coax fails. CPRI, analog, and hybrid transport.

Turnkey Kits ATB / CPRI Long Haul
02

Distributed Antenna Systems

Active and passive DAS for IEM, wireless mic, and comms distribution across large venue footprints.

Turnkey Kits IEM / Wireless Multi-Zone
03

Audio over IP

Dante and AES67 network audio infrastructure — switches, interfaces, bridging, and our custom microwave transport kit.

Dante / AES67 Focusrite Microwave Kit
04

Turnkey Show AV Networks

Complete Unity server and Unity Connect rigs — Mac Mini Sonnet rack systems with I/O for full show AV environments.

Unity Server Mac Mini Racks Sonnet I/O
05

The Freq Show

Our proprietary distributed RF scanning system. Custom Pelican cases with RPi + SDR deployed across a venue, all reporting to a central server.

Proprietary Remote RF Coord LAN-based
06

RF & Audio Design Services

RF coordination, frequency planning, network audio design, and on-site technical support for complex shows.

RF Coordination Audio Design Consult

Not sure what you need?

We'll spec the system for your show. RF coordination, network audio design, DAS layout — we build it around your production.

Talk to Us
01 / RF over Fiber

Turnkey RF over Fiber
Systems

When coaxial cable runs out of gas — distance, loss, and interference limits — fiber takes over. Our RF over fiber kits extend antenna coverage reliably from 100 meters to multiple kilometers.

Professional wireless antenna system deployed at arena scale
When Do You Need RF over Fiber?

Standard RG8/LMR coaxial cable loses signal fast. Beyond ~150 ft at UHF frequencies you're fighting insertion loss that active antenna combiners can't fully recover. At 500ft+ coax is essentially not viable without exotic, expensive cable. RF over fiber introduces near-zero transmission loss over any practical distance — ideal for large venues, stadiums, arenas, campuses, and multi-stage events.

Cable Loss Reference

Insertion loss at 700 MHz — the heart of wireless mic / IEM frequency ranges.

Cable Type100 ft300 ft500 ft1000 ft
RG58~5 dB~15 dB~25 dB XX
RG8X~3 dB~9 dB~15 dBX
LMR-400~1.5 dB~4.5 dB~7.5 dB~15 dB X
RF over Fiber<0.5 dB<0.5 dB<0.5 dB<1 dB OK

* RF over fiber loss is dominated by conversion electronics, not cable length. A 10km run has the same loss as 100ft.

Ideal Use Cases
  • Stadiums and arenas — antenna positions hundreds of feet from the rack room
  • Multi-building campuses where running coax isn't viable
  • Theatrical fly systems — antenna on a fly piece, rack stays on deck
  • Broadcast trucks where fiber infrastructure already exists
  • Any run over 150 ft where LMR-400 would be impractical
  • GNSS antenna distribution for microwave transport timing sync

How It Works

An RF-over-fiber link converts the RF signal (typically 400–900 MHz for wireless mics/IEMs) from coax to analog light on a single-mode or multi-mode fiber strand. A remote unit at the antenna position converts back to RF. Power is supplied via PoE or DC to the remote unit.


  • Frequency Range400–900 MHz (UHF)
  • Max DistanceUp to 10 km (single-mode)
  • Fiber TypeSM or MM, SC/APC or LC
  • Transport Loss<1 dB over full run
  • Tx/Rx Units1:1 or 1:N topologies

What's in the Kit

  • RF-over-fiber transmitter rack unit
  • Remote antenna head with fiber Rx
  • Single-mode fiber LC patch cables (various lengths)
  • PoE injector / DC power supply
  • Splitter/combiner as needed for multi-drop
  • Mounting hardware and labels
  • Pre-tested, labeled, tour-ready packaging

Rental Inventory

All units tour-tested, rack-ready, and shipped in labeled cases.

Wisycom rack gear — SPL2216, MAT244, MFL-TTRR
ItemDescriptionQtyStatus
Wisycom BFLT1Single-channel RF-over-Fiber transmitter module — 170–1260 MHz, selectable filters (40 MHz tunable UHF + fixed options), Bluetooth 5 remote control via Wisycom BT app, OLED display. ANT and IFB modes. DC out for PAW/LBP boosters. Point-to-point and point-to-multipoint capable. Interoperable with MFL system.6In Stock
Wisycom BFLR1Single-channel RF-over-Fiber receiver module — matched pair for BFLT1. 170–1260 MHz, photodiode receiver, selectable filters, 12V DC out for amplifiers, Bluetooth 5 remote control, OLED display. ANT and IFB modes. SC/APC or LC/APC optical connector options.6In Stock
Wisycom BFL1 Matched Kit1x BFLT1 + 1x BFLR1 — single antenna position kit. Pre-paired, tested, and configured. Compact alternative to the MFL rack system for single-channel point-to-point runs.6 kitsIn Stock
Wisycom MFL-RRTT1RU rack-mount wideband optical link — 2x RX modules (ch. 1510/1530nm) + 2x TX modules (ch. 1550/1570nm). Up to 4 RF channels over a single fiber via CWDM. 140–960 MHz, digitally tunable filters, integrated RF/optical power meters, IFB mode, failsafe redundancy, Ethernet remote control via Wisycom Manager. Pairs with MFL-TTRR for full-duplex bidirectional links.6In Stock
Wisycom MFL-TTRR1RU rack-mount wideband optical link — 2x TX modules (ch. 1510/1530nm) + 2x RX modules (ch. 1550/1570nm). Matched counterpart to MFL-RRTT for bidirectional RF-over-fiber links. CWDM technology, automatic RF level monitoring to prevent fiber saturation, IFB mode, failsafe switching, Ethernet control.6In Stock
Wisycom MFL TTRR/RRTT Matched PairOne MFL-TTRR + one MFL-RRTT — complete bidirectional RF-over-fiber link. Carries up to 4 channels of RF (2 in each direction) over a single strand of single-mode fiber. Standard config: 2x diversity mic RX and 2x IFB TX over one fiber run.6 pairsIn Stock
Wisycom BFLT2Dual-channel RF-over-Fiber transmitter module — 170–1260 MHz, dual 6mW optical lasers, CWDM 5-way mux, 12V DC out for amplifiers, Ethernet/SFP/Bluetooth/LoRa, OLED display. IFB/ANT mode switchable. WisyLink access point for Symphony Series TX remote control.4In Stock
Wisycom BFLR2Dual-channel RF-over-Fiber receiver module — matched pair for BFLT2. 170–1260 MHz, SFDR 116 dB/Hz²/³, NF 10 dB, 20 bandpass filters + 40 MHz tunable filter, CWDM 5-way mux, Ethernet/SFP/Bluetooth/LoRa. Remote-controllable via Wisycom Manager.4In Stock
Wisycom BFL2 Matched Kit1x BFLT2 + 1x BFLR2 — fully paired, tested, and configured. Single-mode fiber, power supplies, and hardware included. Ready to deploy as a complete antenna position.4 kitsIn Stock
Single-Mode Fiber Patch — 100ftLC/APC–LC/APC, OS2 SM, breakout style10In Stock
Single-Mode Fiber Patch — 500ftLC/APC–LC/APC, OS2 SM, armored4In Stock
GNSS Antenna + RF over Fiber KitGNSS antenna with fiber transport for remote timing sync — used with microwave transport kit2 kitsIn Stock
RF Workbox — Standard LoadoutProduction-ready RF workbox: antenna distro, combiners, BNC/TNC patch panel, labeled cable bundle, power strip, spare hardware. Spec varies by show — contact us to configure.AvailableOn Request

Need help designing your antenna run?

We'll pull a cable loss budget and spec the right kit for your venue.

Get a Quote
02 / Distributed Antenna Systems

Distributed Antenna
Systems

Single-point antenna solutions fail at scale. DAS distributes your RF coverage across an entire venue footprint — consistent signal at every seat, stage, or production position.

What Is a DAS?

A Distributed Antenna System takes a signal source (wireless mic receiver, IEM transmitter, comms base) and distributes it to multiple antennas placed strategically across a space. The result: uniform RF coverage with no hot spots or dead zones. Active DAS adds gain at each antenna point; passive DAS uses splitters and relies on careful cable loss management.

When You Need DAS
  • Arena or stadium — single antenna can't cover 400 ft of stage
  • Multi-room conference or convention center
  • Theme parks and large outdoor footprints
  • Theatrical with complex staging configurations
  • Any show where a single omni antenna creates RF asymmetry issues
  • Broadcast remotes where cameras roam over a large area

Active vs Passive DAS

  • Active DASAmplified at each node
  • Best forLong runs, multiple floors
  • Passive DASSplitters + LNA at head
  • Best forCompact multi-zone
  • HybridFiber backbone + active nodes
  • Best forStadiums, mega-events

What's in the Kit

  • Active antenna combiners / splitters
  • Helical, cardioid, and omni remote antennas
  • Antenna mast / stand hardware
  • LMR-400 and RG8X cable bundles
  • Labeled tour case packaging
  • Optional RF over fiber integration

Rental Inventory

Wisycom-compatible and system-agnostic components stocked.

ItemDescriptionQtyStatus
Active Antenna Combiner/Distributor4-way active, 470–900 MHz, rack-mount, DC/PoE4In Stock
Helical Directional AntennaHigh-gain, UHF, BNC female, 50 Ohm8In Stock
Omni Remote AntennaLow-profile, discreet mount, UHF6In Stock
Passive 2-Way SplitterUHF, SMA, low-loss, DC-pass capable12In Stock
Wisycom MAT288Programmable wideband diversity matrix combiner — 150–1160 MHz, combines RF from 8 antenna zones (4 diversity pairs) on the fly via solid-state switches. Configurable as diversity 4:2, non-diversity 8:1 or 8:4. Ethernet remote control, redundant AC/DC power, programmable input attenuators, remote LNA gain control via coax. Ideal for large venues, multi-studio facilities, and touring OB.2In Stock
Wisycom MAT244Flexible wideband diversity matrix combiner — 150–1160 MHz, designed for multi-site production environments. SW-configurable as diversity 4:2 with 6dB gain, or non-diversity 8:4 / 8:1. Remote antenna control, attenuation/boost management, integrated RF meter, Ethernet control via Wisycom Manager. Compact form factor for touring and convention use.4In Stock
Wisycom SPL221616-way passive splitter, UHF, DC-pass, rack-mount2In Stock
Wisycom SPL22088-way passive splitter, UHF, DC-pass4In Stock
Wisycom In-Line AmplifiersUHF in-line gain stage, various gain ratings, BNC8In Stock
Wisycom RF Adapters / AttenuatorsBNC, SMA, N-type adapters; 3dB, 6dB, 10dB padsAssortedIn Stock
Wisycom MCR42 Receiver (pair)Dual-channel UHF true diversity rack receiver6 prIn Stock
Wisycom MTP41 BodypackHigh-density, programmable UHF bodypack transmitter12In Stock
Turnkey DAS Kit — 4 Zone4x remote antennas, 4x active dist., all cable and hardware2 kitsIn Stock

Need a custom DAS design?

We'll draft your antenna layout and coverage map before you even receive the gear.

Get a Quote
03 / Audio over IP

Dante & AES67
Audio over IP

Replace analog snake runs with scalable, flexible network audio. Our Dante/AES67 kits handle everything from simple point-to-point to complex multi-venue networks — including our custom microwave transport solution.

Why Network Audio?

A standard Cat6 cable replaces 48 channels of analog snake. Dante and AES67 provide sub-millisecond latency, automatic routing, and redundancy on standard IP infrastructure. Scale from 2 channels to 512+ without re-cabling. Our Focusrite RedNet, Digital Audio Denmark, and Netgear AV switching infrastructure is production-tested on major broadcast and touring events.

Ideal Scenarios
  • Multi-console shows sharing inputs over a network
  • FOH-to-monitor splits via Dante instead of analog
  • Broadcast feed distribution to multiple record stations
  • Interfacing Avid MADI to Dante ecosystems
  • Remote stage boxes via CAT6 or fiber SFP
  • Microwave transport between buildings or across venues

Microwave Transport Kit

Our proprietary Dante and AES67 over microwave system provides point-to-point audio transport over line-of-sight wireless links — perfect for cross-venue splits, inter-building audio, or any run where fiber isn't practical. Timing sync is handled via GNSS (with optional RF-over-fiber GNSS distribution) or Iridium satellite for locations without clear sky view.

  • ProtocolDante / AES67
  • TransportMicrowave (5 GHz)
  • RangeUp to 500m LOS
  • Latency<5ms end-to-end
  • ChannelsUp to 64 bidirectional
  • Timing SyncGNSS or Iridium satellite

Rental Inventory

Focusrite, Digital Audio Denmark, Avid, and Netgear AV — all pre-configured and tested.

ItemDescriptionQtyStatus
Focusrite RedNet A16R MkII16-in / 16-out analog I/O, Dante, rack-mount4In Stock
Focusrite RedNet D16R MkII16-ch AES3 I/O, Dante2In Stock
Digital Audio Denmark AX6464-ch MADI-Dante bridge, 4x MADI, SFP, redundant PSU2In Stock
Digital Audio Denmark AX3232-ch MADI-Dante bridge, 2x MADI, SFP, redundant PSU2In Stock
Digital Audio Denmark AX256256-ch AoIP gateway, Dante/AES67/MADI, high-density1In Stock
DAD Option Cards — Analog I/O8-channel analog in or out expansion cards for AX seriesAssortedIn Stock
DAD Option Cards — AES I/O8-channel AES3 I/O expansion cards for AX seriesAssortedIn Stock
DAD Option Cards — MADIAdditional MADI ports for AX series expansionAssortedIn Stock
DAD Option Cards — SDI / VideoSDI embedded audio extraction/insertion cardsAssortedContact Us
Avid MTRX2High-density audio interface, Dante/MADI/AES/Analog, Pro Tools HD1In Stock
Netgear AV M4250 Series Switch48-port PoE+ AV-optimized switch, SFP+ uplinks, rack4In Stock
Netgear AV M4300 Series Switch48G+4x10G uplinks, L3, IGMP managed, SFP2In Stock
Dante/AES67 Microwave Transport KitProprietary — 5 GHz radio bridges with Dante interface. GNSS or Iridium sync. Up to 64ch bidirectional, LOS 500m1 kitProprietary
Turnkey Dante Network Kit — Small2x RedNet A16R, 1x M4250 switch, CAT6, SFP, configured2 kitsIn Stock

Have a complex audio network?

We design Dante/AES67 systems and can configure everything before it ships.

Get a Quote
04 / Turnkey Show AV Networks

Turnkey Show AV
Networks

Production-ready Unity server and Unity Connect environments — Mac Mini Sonnet rack systems with professional I/O for full show AV control networks. Arrive, plug in, go.

Unity Server Kit

High-density Mac Mini nodes in a Sonnet RackMac chassis. Pre-imaged for Unity Server operation. Handles video playback, show control, and media server duties for large productions.

  • Mac Mini (M2 Pro, 32GB RAM, 2TB)
  • Sonnet RackMac Mini chassis (4-bay)
  • Thunderbolt 4 I/O interface
  • 1GbE / 10GbE network connectivity
  • Unity Server pre-installed and licensed
  • Rackmount UPS

Unity Connect Kit

Client-side Connect nodes for distributed show AV environments. Connects to the Unity Server over the show network for distributed media playback, signage, and cue triggering.

  • Mac Mini (M2, 16GB RAM, 1TB)
  • Sonnet single-slot enclosure
  • I/O breakout (HDMI, DP, USB, Audio)
  • Unity Connect pre-configured
  • CAT6 / fiber SFP network
  • Preconfigured and tested

Full Show AV Bundle

1x Unity Server Kit + 4x Unity Connect nodes — complete network-ready show AV system for large events, broadcast, and multi-screen productions.

  • Everything in Server + Connect kits
  • Managed AV switch (Netgear M4250)
  • Pre-patched and labeled ethernet runs
  • Setup documentation included
  • Remote tech support available
Pre-Configured, Not Just Delivered

Every Show AV kit ships pre-configured for your show. We image the drives, test the Unity network, label every cable and port. You're not getting boxes — you're getting a production system that works on arrival.

Rental Inventory

ItemSpecQtyStatus
Unity Server — Sonnet Rack (4-node)4x Mac Mini M2 Pro, Sonnet chassis, Thunderbolt I/O1In Stock
Unity Connect NodeMac Mini M2, Sonnet enclosure, Unity Connect4In Stock
Netgear AV M4250 AV Switch48-port PoE+ managed, dedicated AV VLAN-ready2In Stock
Full Show AV BundleServer + 4 Connect + switch + all cable1Contact Us

Need a custom Unity build?

We can spec, image, and pre-test a system for your exact show requirements.

Talk to Us
05 / Proprietary System

The Freq Show

Our custom, in-house distributed RF scanning system for large-scale events. Deploy 5 to 100 units across a convention center, arena, or campus — each one a self-contained scanner node that reports back to a central server in real time.

Proprietary — Built In-House

Distributed RF Coordination
at Production Scale

The Freq Show puts a live spectrum view in the hands of any coordinator on your network — without them needing to be physically near an RF scanner. Each node is a custom-engineered, self-contained proprietary antenna array and computing platform built in-house by Eighty32. Designed for large shows where a single RF coordinator and a single scanner can't cover the whole footprint.

How It Works

Proprietary scanner nodes — custom-engineered antenna arrays and computing platforms housed in ruggedized enclosures — are deployed at strategic positions across the venue and connected to the show LAN. Each node streams live spectrum data to a central server. Any connected workstation on the network can access the full spectrum view through a browser interface. Deploy as few as 5 or as many as 100+ units depending on venue scale.


  • Node HardwareProprietary compute + SDR platform
  • AntennaCustom-designed wideband array
  • EnclosureRuggedized field enclosure
  • Frequency Range400 MHz – 6 GHz
  • Access MethodBrowser / LAN
  • Simultaneous UsersUnlimited on LAN
  • LatencyNear real-time (<500ms)
  • Scale5 to 100+ nodes
Who Needs This
  • Large festivals — multiple stages, multiple coordinators sharing spectrum data
  • Sports broadcasts where RF teams are spread across a large venue
  • Convention centers and arenas where a single scanner can't cover the space
  • Any show where IM and interference monitoring needs to happen continuously, not just at setup
  • Corporate and convention events — also deployable for WiFi user experience monitoring
  • Shows where coordinators are physically separated from antenna positions

What's Included

  • Proprietary scanner nodes (custom antenna array + compute platform)
  • Freq Show central server appliance
  • Network switch + patch cables
  • Antenna mounts for scanner positions
  • Setup and integration support from Eighty32
  • Remote monitoring access for our team during your show
This System Is Ours — Not Available Anywhere Else

The Freq Show is a completely custom system designed, built, and operated by Eighty32. It ships pre-configured and we remain available remotely throughout your show for support and spectrum interpretation.

Interested in the Freq Show?

Let's talk through your show's RF coordination needs and how we can deploy it.

Get in Touch
Services

RF & Audio Design
Services

Gear rental is only part of what we do. Our technical services cover the full spectrum — from frequency coordination and RF system design to Dante network architecture and on-site engineering support.

RF Coordination

Pre-show frequency planning, intermodulation analysis, channel assignment, and on-site spectrum monitoring. We use our own Freq Show system for large deployments.

  • IM3/IM5 intermodulation calculations
  • TV whitespace and DTV interference analysis
  • Channel assignment files for Wisycom, Shure, and others
  • On-site real-time spectrum monitoring
  • Remote RF coordination via Freq Show

Audio Network Design

End-to-end Dante and AES67 network architecture for live events, broadcast, and permanent installs. We design, document, and if needed, deploy.

  • Network topology and switch config
  • VLAN and QoS design for audio
  • Dante / AES67 channel map and routing
  • Redundancy and failover planning
  • Integration with existing console ecosystems

DAS System Design

Antenna layout planning for venues of any size. We pull cable loss budgets, model coverage zones, and specify everything you need.

  • Venue RF walk and site survey
  • Antenna placement diagrams
  • Cable loss and gain budget
  • Active vs passive DAS recommendation
  • Full bill of materials

On-Site Engineering Support

Need a hands-on RF or network audio engineer on-site? We travel. From prep day through final strike.

  • System deployment and integration
  • Crew training on RF systems
  • Show day spectrum monitoring
  • Troubleshooting and optimization
  • Available for touring, one-offs, and residencies
We Take On Custom Projects

Not every production fits a standard category — and that's exactly where we're most useful. If you have a problem that doesn't have an obvious off-the-shelf solution, tell us about it. We've built proprietary systems from scratch, reverse-engineered broken workflows on the fly, and specced infrastructure for situations nobody had a rental catalog entry for. Whether it's a one-of-a-kind venue, an unusual signal path, a tight timeline, or something nobody has tried before — reach out. If we can solve it, we will. If we can't, we'll tell you that too.

Tell Us About Your Project

Ready to talk about your show?

Every production is different. We'll build a solution around yours.

Start a Conversation
About Eighty32

Built by
Audio People

Eighty32 was founded to solve a real problem in production: there was no single source for the turnkey RF and network audio systems that modern events actually require.

Chris and Blanca DeBrizzio, Co-Founders of Eighty32

Chris DeBrizzio founded Eighty32 after years of working across the full breadth of live audio — broadcast, corporate, major sporting events, and large-scale music festivals. Through that work, a pattern became clear: productions were constantly cobbling together gear from multiple vendors, improvising system designs on-site, and spending prep time solving problems that should have been solved before the truck arrived.

Eighty32 exists to change that. Every kit we ship is pre-configured, tested, and labeled. Every system design starts with a conversation about what your show actually needs — not what's available. We stock the gear that actually gets used at the top level of touring and broadcast: Wisycom, Digital Audio Denmark, Focusrite, Avid, Netgear AV, Shure — and we build proprietary systems, like the Freq Show, when off-the-shelf tools don't cut it.

We're based in Las Vegas — the crossroads of touring, residency, and convention production. When the world's biggest shows come to town, we're already here.

Disciplines
  • Large-scale music festivals and touring
  • Broadcast and sports production
  • Corporate events and convention centers
  • Residency and venue installs
  • Proprietary system design and fabrication
Co-Founders

Chris DeBrizzio
Blanca DeBrizzio

Email

[email protected]

Phone

702 907 4762

Address

3725 W. Teco #8
Las Vegas, NV 89138

Website

eighty32.com

Request a Quote
Get in Touch

Request a Quote

Tell us about your show — dates, venue, system needs. We'll come back with a tailored proposal, usually within one business day.

Send Request
Email

[email protected]

Phone

702 907 4762

Address

3725 W. Teco #8
Las Vegas, NV 89138

Response Time

We typically respond within 1 business day with a custom proposal.

What to